11.1V 2200mAh 3S LiPo Battery (High-Discharge Lithium Polymer Pack)

Description When your project outgrows the limitations of single-cell batteries, the 11.1V 2200mAh 3S LiPo Battery provides the serious voltage and sustained amperage required to drive heavy loads. "3S" indicates that this battery contains three 3.7V lithium-polymer cells wired in series, resulting in a nominal voltage of 11.1V and a fully-charged peak voltage of 12.6V. Unlike the small, low-drain LiPos used in microcontrollers, this pack is specifically engineered for high-drain applications. It is capable of dumping massive amounts of current (often rated at 25C, 30C, or higher) into brushless motors and heavy-duty servos without experiencing severe voltage sag. To handle this power, it comes equipped with thick silicone-insulated wires terminated in a high-current connector (typically an XT60 or T-Deans plug), alongside a standard JST-XH balance connector required for safe, even charging. Key Features & Functional Advantages: Extreme Discharge Capability: Designed to sustain high continuous current draws (e.g., a 30C pack can safely deliver 66 Amps continuously), providing the immediate burst power required for rapid acceleration or heavy lifting. Cell Balancing Architecture: Features a dedicated multi-pin JST-XH balance lead. This allows a smart charger to monitor and independently charge each of the three internal cells, preventing individual cells from overcharging and drastically extending the pack's lifespan. Heavy-Duty Power Connectors: Utilizes thick AWG silicone wiring and heat-resistant connectors (like XT60) that will not melt or degrade under sustained high-amperage electrical loads. Optimized Power-to-Weight Ratio: Provides a massive amount of energy density relative to its physical weight, which is an absolute necessity for achieving flight in aerial vehicles or maintaining agility in ground rovers. Flat Discharge Curve: Maintains a relatively stable, high voltage profile throughout the majority of its discharge cycle, ensuring your motors run at peak RPMs until the battery is nearly depleted. Perfect For: Drones & UAVs: The industry-standard battery size for 450-class quadcopters and mid-sized fixed-wing RC airplanes that rely on 12V-class brushless motors. RC Cars & Boats: Provides blistering top speeds and aggressive torque for 1/10th and 1/8th scale radio-controlled trucks, buggies, and watercraft. Custom Robotics: An excellent main power source for autonomous rovers, hexapods, and combat robots requiring 12V power for heavy-duty DC motors and high-torque servos. Portable 12V Electronics: Highly useful for powering high-wattage custom LED arrays, portable audio amplifiers, and field-deployed electronic rigs that require a mobile 12V source. Technical Specifications: Battery Chemistry: Lithium Polymer (LiPo) Cell Configuration: 3S1P (3 Cells in Series, 1 in Parallel) Nominal Voltage: 11.1V Fully Charged Voltage: 12.6V (4.2V per cell) Nominal Capacity: 2200mAh (2.2 Amp-hours) Typical Discharge Rate (C-Rating): 25C to 35C Continuous (Varies by manufacturer) Main Power Connector: XT60 or T-Deans (Verify before purchase) Balance Connector: 4-Pin JST-XH Approximate Dimensions: 105 mm x 34 mm x 24 mm (L x W x H) Approximate Weight: 175 to 190 grams Shipping information Ensure your order is placed by 2PM to guarantee next-day delivery! Our commitment to prompt service includes a 24-hour delivery system through our network of carriers, aimed at ensuring your package arrives right on schedule.Please note, a delivery fee of €4.99 applies for orders under €50. For those in remote areas, be aware that our couriers may apply an extra surcharge. This additional fee helps cover the costs of transporting your items to harder-to-reach locations.